锐捷ruijie交换机配置AP后发现，聚合后的端口bandwidth显示的是1000M，而不是2000M

之前老些的版本，都是这样，例如S5750 10.3（5b1）版本，做AP聚合后，bandwidth显示的是1000000 Kbit，而不是2000000 Kbit，但是这不影响使用，属于正常现象：

Ruijie#show int aggregateport 1

Index(dec):25 (hex):19

AggregatePort 1 is UP  , line protocol is UP   

Hardware is Aggregate Link AggregatePort, address is 00d0.f8ad.a3ac (bia 00d0.f8ad.a3ac)

Interface address is: 192.168.1.1/24

ARP type: ARPA,ARP Timeout: 3600 seconds

  MTU 1500 bytes, BW 1000000 Kbit

  Encapsulation protocol is Ethernet-II, loopback not set

  Keepalive interval is 10 sec , set

  Carrier delay is 2 sec

  RXload is 1 ,Txload is 1

  Queueing strategy: FIFO

    Output queue 0/0, 0 drops;

    Input queue 0/75, 0 drops

  Switchport attributes:

*新发布的10.4（3）的版本都有进行更改，显示会变成2000000 kbit

Ruijie#show interfaces aggregateport 1

Index(dec):26 (hex):1a

AggregatePort 1 is UP  , line protocol is UP   

Hardware is Aggregate Link AggregatePort

Interface address is: no ip address

  MTU 1500 bytes, BW 2000000 Kbit

  Encapsulation protocol is Bridge, loopback not set

  Keepalive interval is 10 sec , set

  Carrier delay is 2 sec

  Rxload is 1/255, Txload is 1/255

  Switchport attributes:

    interface's description:""

    admin medium-type is Copper, oper medium-type is Copper

    lastchange time:5 Day: 4 Hour:35 Minute: 4 Second

    Priority is 0

    admin duplex mode is AUTO, oper duplex is Full

    admin speed is AUTO, oper speed is 1000M

    flow receive control admin status is OFF, flow send control admin status is OFF

    flow receive control oper status is OFF, flow send control oper status is OFF

    Storm Control: Broadcast is OFF, Multicast is OFF, Unicast is OFF

  Port-type: trunk

    Native vlan: 1

    Allowed vlan lists: 1-4094

    Active vlan lists: 1-3

Aggregate Port Informations:

        Aggregate Number: 1

        Name: "AggregatePort 1"

        Refs: 2

        Members: (count=2)

        GigabitEthernet 0/1              Link Status: Up

        GigabitEthernet 0/2              Link Status: Up